Minden, NV – October 15th & 16th Maxton Manufacturing held CET hydraulic elevator control valve training classes for 45 elevator technicians at Mitsubishi Electric US, Inc., Elevator/Escalator Division Cypress, CA. The group was broken down into 4 classes, each 4 hours long, covering valve adjustments and troubleshooting with the TA4M simulator, product knowledge, contamination, pressure…
Minden, NV – September 12, 2013 Maxton Manufacturing held a CET hydraulic elevator mechanic training class for the elevator maintenance department at University of Virginia (UVA) in Charlottesville, VA. 12 elevator mechanics participated in the training covering valve adjustments and troubleshooting with the TA4M simulator while discussing valve operations and function, hydraulic oils, and…
Minden, NV– On August 16, 2013 Maxton held two hydraulic elevator control valve classes with 12 elevator technicians attending from ThyssenKrupp Portland, OR. These classes provided the technicians with continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions were made up of classroom instruction and practical application through…
Minden, NV – On September 3, 2013 Maxton Manufacturing Company announced its UC4M HD (High Duty) electronic elevator control valve with pilot program. Maxton will collect entries for its UC4M HD Pilot Program at the 2013 NAEC 64th Annual Convention & Expo in Tampa, FL September 25th & 26th at booth #0820. Maxton will…
Minden, NV– August 26, 2013 Maxton Manufacturing Company released their elevator control valve maintenance tasks & procedures for Maintenance Control Program (MCP) generation. As states, municipalities, and governing bodies begin to adopt more and more of the latest elevator codes, including an MCP for each elevator, manufacturers will need to provide written product specific…
Minden, NV- Maxton Manufacturing Company released their new Threaded Elevator Isolation Coupling design July 1, 2013. The new ISO2T design provides a 2 inch NPT threaded connection for jobs that specify fixed non-grooved pipe connections. The success of the grooved connection ISO2 for the elevator industry confirmed Maxton’s design in the field over the last…
Minden, NV– On the morning of June 19, 2013 William Shrum IV from Maxton Manufacturing Company will deliver a valuable one hour training session for Elevator U 2013 attendees at Iowa State University. The training topic, Diagnosing and Troubleshooting of Common Problems Found in Hydraulic Elevator Systems, and its content have proven to be highly…
Minden, NV– On June 6th-7th, 2013 Maxton Manufacturing Company will be exhibiting at CECA’s 39th Annual Convention in Niagara Falls, ON. Come see what Maxton has to offer you and your customers at booth #48. Visitors will see several products on display, receive technical input, collect beneficial resources and come away with handy tools…
Minden, NV– On March 21, 2013 Maxton conducted two CET hydraulic elevator control valve classes with 21 mechanics attending from Fujitec Dallas, TX. These classes provide the mechanics with continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions were made up of classroom instruction and practical application through…
Minden, NV– On March 5-6th Maxton Manufacturing Company provided two CET trainings with Maxton valves at Jersey Elevator Co. Inc, in Aberdeen, NJ. In total 32 elevator mechanics and/or helpers attended the trainings for continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. Each session was made up of classroom…