Minden, NV– On February 27, 2014 Maxton Manufacturing Company held CET training for 7 elevator mechanics at Diamond Elevator in San Ramon, CA. The 4.0 credit hour Maxton Hydraulic Elevator Control Valve Training covered both classroom instruction and hands on application. This interaction between factory and those in the field is always enlightening for both…
SEES hosts Maxton Hydraulic Control Valve Training #2000114 4.0 credit CET classes (Approved by State of FL) Be there on March 26th or 27th! Where: SEES, located at 1170 W. McNab Rd. Ft. Lauderdale, FL 33309 When: Wednesday March 26th 12 PM – 4:15 PM or 6 PM – 10:15 PM Thursday March…
Minden, NV – November 12th Maxton Manufacturing Company held CET hydraulic elevator control valve training classes for 30 elevator technicians at Washington Metropolitan Area Transit Authority (WMATA) in Landover, MD. Two classes of four hours each, covered valve adjustments and troubleshooting with the TA4M training unit, product knowledge, contamination, pressure, temperature issues, and hydraulic elevator…
Minden, NV – November 14th & 15th Maxton Manufacturing Company held CET hydraulic elevator control valve training classes for 75 elevator technicians, inspectors and industry professionals at Delaware Elevator in Salisbury, MD. The four classes covered valve adjustments and troubleshooting with the TA4M training unit, product knowledge, contamination, pressure issues, and hydraulic elevator system design…
Minden, NV – September 12, 2013 Maxton Manufacturing held a CET hydraulic elevator mechanic training class for the elevator maintenance department at University of Virginia (UVA) in Charlottesville, VA. 12 elevator mechanics participated in the training covering valve adjustments and troubleshooting with the TA4M simulator while discussing valve operations and function, hydraulic oils, and…
Minden, NV– On August 16, 2013 Maxton held two hydraulic elevator control valve classes with 12 elevator technicians attending from ThyssenKrupp Portland, OR. These classes provided the technicians with continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions were made up of classroom instruction and practical application through…
Minden, NV– On March 21, 2013 Maxton conducted two CET hydraulic elevator control valve classes with 21 mechanics attending from Fujitec Dallas, TX. These classes provide the mechanics with continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions were made up of classroom instruction and practical application through…
Minden, NV– On March 5-6th Maxton Manufacturing Company provided two CET trainings with Maxton valves at Jersey Elevator Co. Inc, in Aberdeen, NJ. In total 32 elevator mechanics and/or helpers attended the trainings for continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. Each session was made up of classroom…
Open Enrollment for Dallas, TX NAEC Regional CET Training!! Both NAEC and non-NAEC members are welcome… The NAEC is sponsoring two days of CET training for continuing education credits at the Sheraton Suites Market Center at 2101 Stemmons, Fwy, Dallas, TX 75207 on March 19th & 20th. Maxton will be holding two 4 hour 4.0…
Minden, NV– On December 5, 2012 Maxton completed their CET hydraulic elevator control valve class with 6 mechanics attending from Colley Elevator Co., in Bensenville, IL. This continuing education class provides the mechanics with credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions are made up of classroom instruction and…