Maxton Manufacturing Company has decided to go paperless regarding the Quick Start Cards and Adjustment Procedures that come attached to our valves and/or under the coil cover. Supply delays and cost increases brought about a need for a solution. Maxton chose to use a QR Code sticker to connect users with the valve information electronically…
Minden, NV – On November 12th & 13th, 2019 Maxton Manufacturing Company held 2 elevator control valve training classes each day at Otis Elevator in Las Vegas, NV. 23 mechanics attended the sessions for continuing education credits (4.0 credit hours CET/CAT) through the NAEC’s approved continuing education program. Each session was made up of classroom…
Minden, NV– On May 8, 2019 Maxton held a hydraulic elevator control valve training for 9 elevator mechanics at Albany Elevator Leesburg, GA. This session provided classroom instruction on product knowledge, identifying and resolving common hydraulic field issues followed by practical application through valve adjustment and troubleshooting using the Maxton TA4M training unit. In addition,…
Minden, NV– On April 23rd & 24th Maxton Manufacturing Company provided three Maxton elevator control valve classes at Slade Elevator in Mountainside, NJ. In total 25 elevator mechanics from the service, maintenance, and modernization areas attended the training’s for continuing education credits (4.0 credit hours) through the NAEC approved continuing education program. Each session was…
Minden, NV– On November 29, 2017 Maxton completed their onsite hydraulic elevator control valve CET training with 8 mechanics attending from MillerCoors in Golden Colorado. This continuing education class provided the mechanics with credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. These sessions are made up of classroom instruction and practical…
Minden, NV– On June 14, 2017 Maxton completed their second round of hydraulic elevator control valve classes with 23 mechanics attending from EMR Services and Dillard’s in Harahan, LA. This continuing education class provided the elevator mechanics with credits (4.0 credit hours) through the NAEC’s approved CET training program. These sessions are made up of…
Minden, NV– On May 12th – 15th Maxton Manufacturing Company will exhibit at the 40th annual CECA convention, hosted by Global Tardif, at the Quebec City Convention Centre. Make sure to visit Maxton’s booth #17B for all your hydraulic elevator control valve questions, support products, and solutions. Some 50 suppliers will be exhibiting at the…
Minden, NV– On April 9, 2014 Maxton Manufacturing Company will exhibit at their first Elevator Conference of New York (ECNY) Supplier Showcase event at the Villa Barone Manor in the Bronx, NY. This is a 7 hour trade show (12:00 pm – 7:00 pm), one day only, free of charge for ECNY members featuring ECNY…
Minden, NV – November 14th & 15th Maxton Manufacturing Company held CET hydraulic elevator control valve training classes for 75 elevator technicians, inspectors and industry professionals at Delaware Elevator in Salisbury, MD. The four classes covered valve adjustments and troubleshooting with the TA4M training unit, product knowledge, contamination, pressure issues, and hydraulic elevator system design…
Minden, NV– On March 5-6th Maxton Manufacturing Company provided two CET trainings with Maxton valves at Jersey Elevator Co. Inc, in Aberdeen, NJ. In total 32 elevator mechanics and/or helpers attended the trainings for continuing education credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician program. Each session was made up of classroom…