Minden, NV – On November 12th & 13th, 2019 Maxton Manufacturing Company held 2 elevator control valve training classes each day at Otis Elevator in Las Vegas, NV. 23 mechanics attended the sessions for continuing education credits (4.0 credit hours CET/CAT) through the NAEC’s approved continuing education program. Each session was made up of classroom…
Minden, NV– On May 14, 2019 Maxton held 3 classes of hydraulic elevator control valve training over 3 days for 20 elevator mechanics at British Columbia Rapid Transit Company, Ltd (BCRTC) in Vancouver, BC Canada. These sessions provided classroom instruction on product knowledge, identifying and resolving common hydraulic field issues followed by practical application through…
Minden, NV– On May 8, 2019 Maxton held a hydraulic elevator control valve training for 9 elevator mechanics at Albany Elevator Leesburg, GA. This session provided classroom instruction on product knowledge, identifying and resolving common hydraulic field issues followed by practical application through valve adjustment and troubleshooting using the Maxton TA4M training unit. In addition,…
Minden, NV– On April 23rd & 24th Maxton Manufacturing Company provided three Maxton elevator control valve classes at Slade Elevator in Mountainside, NJ. In total 25 elevator mechanics from the service, maintenance, and modernization areas attended the training’s for continuing education credits (4.0 credit hours) through the NAEC approved continuing education program. Each session was…
Minden, NV– On April 2, 2019 Maxton Manufacturing Company launched its next generation elevator performance meter, the SafeTach2 (ST2). After nearly two decades of SafeTach sales Maxton has carried on by incorporating an App/Node combination applying the latest hardware and software with user mobile devices that takes the elevator performance meter you knew to another…
Minden, NV– On January 1, 2019 Maxton announced they will obsolete the UC3A/AM elevator control valve series effective immediately. Maxton produced the UC3A/AM from 1977 to 1983 and since that time the UC3A/AM became a repair/VEP product only. Maxton will no longer service, repair, nor make/supply replacement parts any longer. Going forward the Maxton UC3A/AM…
Minden, NV – On November 29, 2018 Maxton Manufacturing Company held elevator control valve training classes at Schindler Elevator Beltsville, MD. 6 mechanics from the new installation team attended the session for continuing education credits (4.0 credit hours) through the NAEC’s approved continuing education program. The session was made up of classroom instruction, Q&A, and…
Minden, NV– On October 9, 2018 Maxton Manufacturing Company provided the last of 4 elevator control valve training sessions at MEI in Mankato, MN. These classes were part of the Maxton NAEC approved CET 4.0 credit hour class covering issues with hands on valve adjustment /trouble shooting, temperature, contamination, pressures and how to handle or…
Minden, NV– On September 20, 2018 Maxton Manufacturing Company received notification from Orion Register, Inc., that their quality management system was re-certified for the 9001:2015 quality standard. Maxton gives credit to its employee’s efforts and execution of its quality management system.
Minden, NV– On June 5 & 6, 2018 Maxton conducted four hydraulic elevator control valve classes for a total of 30 mechanics at Otis Elevator Las Vegas, NV. These continuing education classes provide the mechanics with credits (4.0 credit hours) through the NAEC’s approved Certified Elevator Technician (CET) program. These sessions are made up of…